Philips 1250X User manual - Page 19

36 ENGLISH C 2 12 Insert the notch of the shaving unit into the slot in the top of the razor (1).Then press the shaving unit down (2) to attach it 1 to the razor.You will hear a 'click'. Cleaning the Trimmer Clean the trimmer after each use. 1 Press the trimmer slide forward to slide out the trimmer. CF C 2 Rinse the trimmer under hot water. BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS. 3 Allow trimmer to air dry. Tip: For optional trimmer performance, lubricate the trimmer teeth with one drop of mineral oil every 6 months. Cleaning the Jet Clean Canister (1280XCC and 1250XCC) For optimal performance of the Jet Clean System, it is recommended that you empty the cleaning solution canister and thoroughly rinse the canister clean every 2 weeks. 1 Place the Jet Clean System on a flat, level surface. ENGLISH 37 C 2 Simultaneously press the buttons located on both sides of the Jet Clean System (1) and lift the appliance off the Jet Clean canister (2). Always remove appliance from canister by lifting straight up. Do not tilt Jet Clean System. C 3 Discard any remaining cleaning solution in the canister. The cleaning solution can be safely poured down the sink as there are no harmful ingredients. C 4 Simply rinse the canister with warm water. Wipe the canister with a towel or tissue to remove excess water. C 5 Pour the Jet Clean Solution into the canister up to a level between the two lines located inside the canister. C 6 Carefully lower the Jet Clean System over the canister making sure the release buttons snap back into position.