Philips 150B4CS User manual - Page 2
Safety & Troubleshooting - electronics
UPC - 037849935699
View all Philips 150B4CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance • Installation Locations • FAQs • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: q Unplug the monitor if you are not going to use it for an extensive period of time. q Unplug the monitor if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids. q Consult a service technician if the monitor does not operate normally when you have followed the instructions in this manual. q The casing cover should be opened only by qualified service personnel. q Keep the monitor out of direct sunlight and away from stoves or any other heat source. q Remove any object that could fall into the vents or prevent proper cooling of the monitor's electronics. q Do not block the ventilation holes on the cabinet. q Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture. q When positioning the monitor make sure the power plug and outlet are easily accessible. q If turning off the monitor by detaching power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation. q To avoid the risk of shock or permanent damage to the set do not expose the monitor to rain or excessive moisture. q When positioning the monitor, make sure the power plug and outlet are easily accessible. q IMPORTANT: Always activate a screen saver program during your application. If a still image in high contrast remains on the screen for an extended period of time, it may leave an 'after-image' or 'ghost image' on front of the screen. This is a well-known phenomenon that is caused by the shortcomings inherent in LCD technology. In most cases the after-image will disappear gradually over a period of time after the power has been switched off. Be aware that the after-image symptom cannot be repaired and is not covered under warranty. Consult a service technician if the monitor does not operate normally when the operating instructions given in this manual have been followed. file:///D|/B/english/150b4cgbs/safety/safety.htm (1 of 2) [8/27/03 11:37:11 AM]