Philips 15MF150V User Manual - Page 16

An after-image appears An afterimage remains after the power has been turned off. Green, red, blue, dark and white dots remain. TV and Audio Problems Poor TV signal reception No TV picture No sound • If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave an afterimage. This usually disappears after a few hours. • This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The afterimage will disappear after a period of time. • The remaining dots are normal characteristic of the liquid crystal used in today's technology. • The proximity of mountains or high buildings may be responsible for ghost pictures, echoing or shadows. In this case, try manually adjusting your pictures: see 'fine tuning' or adjust the direction of the outside aerial. • Have you connected the aerial socket properly? Have you chosen the right system? Poorly connected aerial sockets are often the cause of picture or sound problems (sometimes the connectors can become half disconnected if the TV set is moved or turned). Check all connections. • Ensure that the audio cables are firmly connected to both the audio input connectors on your TV and audio output connectors on your PC or Video player. For further assistance, contact your local distributor. Other Related Information For units set at 115 V : Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V. 15