Philips 19PFL3505D User manual - Page 10
Installing the remote control batteries, Connecting the antenna or cable
UPC - 609585186149
View all Philips 19PFL3505D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English Installing the remote control batteries 1 Slide the battery cover off the back of the remote control. 2 Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and - ends of the batteries line up with the markings inside the case. 3 Slide the cover back into position. Note • Remove the batteries if not using the remote control for an extended period of time. Connecting the antenna or cable If you connect to a DBS (Direct Broadcast Satellite) There are two main DBS systems : DirecTV and DishNetwork.These systems require a separate, proprietary set-top box to decode signals and send them to the TV.The set-top box contains a digital TV tuner for receiving off-air digital broadcasts. Contact your local DBS provider for more information about the connections and the TV channels. If you connect to a set-top box A cable box or satellite set-top box can be connected to the TV through the following connections : • ANT • A/V (Composite Video and Audio) • S-Video • YPbPr (Component Video Input) • HDMI For information about how to connect a set-top box, see the Quick Start provided. If you connect a set-top box through RF IN/OUT If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 or 4, or to the channel specified by the service provider. Cable If you connect to an antenna Any DTV programs that are broadcast in your area can be received for free through an antenna connection. Contact your local content provider or your local electronics retailer if you are unsure about what HDTV programs are available in your area. Broadcasters are transitioning from analog to digital TV.This means that a given broadcaster can have channels available either in analog or in digital, or both analog and digital at the same time. The TV produces stereo sound only if a stereo signal is broadcast. If you connect to a cable When your TV is connected to the cable socket, you might receive free digital and high definition programs (depending on your cable provider). The channel number for digital and high definition channels includes a dot ".". For example, 11.1, 46.30, 108.201. Contact your cable provider for more information. If you connect a set-top box through component video input or HDMI EN 9