Philips 220BW8CB1 User Manual - Page 13
An after-image remains after the power, has been turned off.
![]() |
UPC - 609585154681
View all Philips 220BW8CB1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Image vibrates on the screen Vertical flicker appears Horizontal flicker appears Check that the signal cable is properly connected to the graphics board or PC. Press the Auto button. Eliminate the vertical bars using the Phase/Clock of More Settings in OSD Main Controls. Press the Auto button. Eliminate the vertical bars using the Phase/Clock of More Settings in OSD Main Controls. The screen is too bright or too dark An after-image appears An after-image remains after the power has been turned off. Green, red, blue, dark, and white dots remains Adjust the contrast and brightness on On-Screen Display. (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact your sales representative). If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave an afterimage. This usually disappears after a few hours This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The afterimage will disappear after a peroid of time. The remaining dots are normal characteristic of the liquid crystal used in today's technology.
![](/manual_guide/products/phillips-220bw8cb1-user-manual-e5babd6/13.png)