Philips 23PF8946 Quick start guide (English) - Page 5

HOOKING UP THE TELEVISION PC (MONITOR) INPUTS This TV can be used as a PC Monitor. Your computer will have to be equipped with a VGA type video output and VGA cable. Appicable to 15"/17"/23" models only. 20" model is for 480p Progressive Scan DVD playback. 4 1 Connect one end of the VGA video cable to the Monitor (video) output on the computer to the PC Input (VGA) jack on the bottom of the TV. 2 Connect the AUDIO PC/HD cable of the TV to the Audio output on the PC. 3 Turn the TV and the Computer ON. 4 Press the VGA Mode button to set the TV into the VGA Mode and tune to the computer's signal. Note : For the display resolutions available to your TV, refer to the Operating Instruction Manual Please contact your dealer or Philips at 800-531-0039 for information about purchasing the needed cables. JACK PANEL at REAR of TV JACK PANEL at REAR of TV JACK PANEL at REAR of TV 3 PC 15"/17"/23" models only 1 VGA Cable Audio Cable 2 17"/20"/23" models only 15" model only AV2 (SIDE) INPUTS M uch like the AV1 jacks, the AV2 jacks allow for extra accessory device connections for items such as cameras or gaming stations. The AV2 Input Jacks are located on the rear of the TV. 1 Connect the VIDEO OUT (yellow) jack of the Accessory device to the VIDEO IN jack on the bottom of the TV. If your accesory device is equipped with a S-VIDEO jack, do not connect to the VIDEO jack. Connect to the S-VIDEO jack instead. 2 Connect the AUDIO OUT (left and right) jacks of the Accessory device to the AUDIO IN (left and right) jacks on the bottom of the TV. 3 Turn the Accessory Device and the TV ON. 4 Press the SOURCE button button on the remote control to select AV2 channel for the accessory device. AV2 will appear in the upper left corner on the TV screen when tuned properly. 5 With the Accessory Device ON, press the PLAY button to activate the playback on the television. AV2 4 JACK PANEL JACK PANEL at REAR of TV at REAR of TV AUDIO CABLES 2 ACCESSORY DEVICE (Camcorder, Camera, etc..) 3 VIDEO CABLE OR 1 5 15" model 17"/20"/23" only models only AUDIO VIDEO RIGHT LEFT S-VIDEO ACCESSORY DEVICE JACK PANEL S-VIDEO CABLE AN S-VIDEO CABLE CAN BE USED IN PLACE OF THE YELLOW V IDEO CABLE IF DESIRED. MONITOR OUTPUTS T he Audio headphone jack can be used to connect an external audio system for better audio sound or to a headphone in any of the available modes. If connected to an audio system or a headphone, there will be no sound from the TV speakers. The sound will come fom the audio system of the headphone. 1 Connect Headphone jack located on the right rear of the TV to the R and L audio input jacks on your sound system or to your headphone set. 2 Turn the TV and Audio system/Headphone ON. The TV sound can be heard through the Audio system/Headphone. JACK PANEL at REAR of TV JACK PANEL at REAR of TV 1 15" model 17"/20"/23" only models only Audio System Connection: AUDIO CABLES (Red & White) R L AUX/TV INPUT PHONO INPUT 2 AUDIO SYSTEM with AUDIO INPUTS Headphone Cable HEADPHONE Headphone Connection: 5