Philips 243S1 User manual - Page 9
select USB Standby Mode, then, Realtek USB Ethernet Network - usb c
View all Philips 243S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2. Setting up the monitor 3. It will show "success" when the installation is finished. 4. You must reboot your computer after the installation has completed. 5. Now you will be able to see "Realtek USB Ethernet Network Adapter" from your program installed list. 6. We recommend to periodically visit the above web link to check for the availability of the most updated driver. Note Please contact Philips service hotline for Mac address clone tool as necessary. 5 USB hub To comply with International energy standards, the USB hub/ports of this display are disabled during Standby and Off modes. Connected USB devices will not work in this state. To permanently put the USB function in "ON" state, please go to OSD Menu, then select "USB standby mode", and switch it to "ON" state. Somehow if your monitor reset to factory setting, ensure to select "USB standby mode" to "ON" state in OSD menu. 6 USB charging This display has USB ports capable of standard power output including some with USB Charging function (identifiable with power icon ). You can use these ports to charge your Smart phone or power your external HDD, for example. The display must be powered ON at all times to be able to use this function. Some select Philips displays may not Power or Charge your device when it enters to "Sleep/standby " mode (White power LED blinking). In that case, please enter to OSD Menu and select "USB Standby Mode", then, turn the function to "ON" mode (default=OFF). This will then keep the USB power and charging functions active even when the monitor is in sleep/standby mode. Warning USB 2.4Ghz wireless devices, such as, wireless mouse, keyboard, and headphones, maybe have interference by the high-speed signal of USB3.2 devices, which may result in a decreased efficiency of the radio transmission. Should this happen, please try the following methods to help reduce the effects of interference. • Try to keep USB2.0 receivers away from USB3.2 connection port. • Use a standard USB extension cable or USB hub to increase the space between your wireless receiver and the USB3.2 connection port. 7