Philips 32PFL7694H User manual (English) - Page 45

What you need • A network router (with DHCP enabled) • A computer with media server software installed. The computer must be connected to the network router via a wired or wireless network connection. • A network cable (RJ45) • Internet connection, for Net TV Note • A complete list of supported media server software is available (see 'Multimedia' on page 51). Connect the TV to a computer network 1 Connect the network cable between the NETWORK connector at the back of the TV, and a network router. Be sure that the router is connected to your computer via a wired or wireless connection and that the router's DHCP setting is enabled. For Net TV service, be sure that the network router has complete access to the Internet (and is not restricted by firewalls or other security systems). NETWORK 4 Setup media server software to access media from your computer (see 'Setup media server software' on page 44), or configure the TV for access to Net TV (see 'Setup media server software' on page 48). Setup media server software Media server software must be properly configured to enable media sharing. Follow the instructions that follow to setup your media server software and to share media folders. If you do not find instructions for your media server software, refer to documentation accompanying your software to enable media sharing. Note • You do not need to complete this section to access Net TV. In Microsoft Windows Media Player 11 Note • The instructions are applicable to both Microsoft Windows XP and Vista. Enable media sharing 1 In Microsoft Windows, start Windows Media Player 11. » Windows Media Player appears. www 2 Switch on the router. 3 Switch on the computer. 44 EN