Philips 37HFL5560D User manual - Page 6
Before calling service - tv 27
View all Philips 37HFL5560D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3. Before calling service Check this list of symptoms and suggested steps before you request service. D Note: Familiarize yourself with the commercial features described in the TV installation setup.The effects of several of these features, if not thoroughly understood, might appear as faulty operation. Symptoms Suggested steps Installation TV does not respond to Check the button on the left hand side of the remote control commands of the Setup must be in the SETUP location (see Accessing the setup Remote Control menu on page 14). TV does not respond to the Guest Remote Control Check if YES is selected in the REMOTE CONTROL LOCK feature (see Specifying the security options on page 24). Select NO if YES is selected. Picture Unable to enter Setup Use the Green Remote Control (RC2573GR) to access the menu via Guest Remote Setup menu and reset the SECURITY setting (see Specifying Control the security options on page 24). No picture Check that the antenna / cable is connected properly at the back of the TV. Check picture adjustments (brightness, contrast, colour, tint). Check Tuning Mode setting (Air / Cable). Possible TV station problem.Try another channel. Ensure VIDEO is not selected in the MUTE feature of the CHANNEL INSTALL menu (see Selecting the Mute Source on page 18). Double image / "ghost" Check antenna, cable or set-top box. image Snowy / noisy picture Check antenna, cable and /or set-top box connections. Ensure that they are properly connected. Power No power Ensure that the TV's AC power cord is plugged into the main socket and to your TV. If there is still no power, disconnect the plug. Wait for 60 seconds and re-attach plug. Switch on the TV again. TV switches off by itself TV cannot be switched off Check ESP (Energy Saving Programmability) setting in TV installation / setup (see Configuring the control options on page 27. Ensure FORCED ON is not selected in the POWER ON feature of the SWITCH ON / OSD menu (see Specifying the configuration when switching on TV on page 23). 5