Philips 39PFL5708 User manual - Page 19
Before you begin
View all Philips 39PFL5708 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Access advanced settings. Color Select a predefined color temperature, or alignment adjust Red / Green / Blue gain and offset. Noise Select the amount of noise reduction for the reduction picture. (Off, Low, Middle, and High) Cursor ◄ Cursor ► Tint to add green to add red Sharpness to soften to sharpen Advanced Settings Dynamic contrast Dynamically enhance the details in the dark, medium, and light areas of the picture. Dynamic backlight Aspect ratio Overscan Dynamically adjusts backlight level based on average brightness of the picture frame. Select the picture ratio to suit the video source. (Normal, Zoom, Wide, Cinema, and Auto) Select to turn On or Off the overscan function. Cursor ◄ Cursor ► Reset Picture Settings Backlight to reduce power consumption to set the backlight brighter Select to restore the default picture settings, while channel installation settings remain the same. Picture Sound Setup Features USB Color alignment Noise reduction Tint Sharpness Dynamic contrast Dynamic backlight Aspect ratio Overscan Backlight Middle 0 55 On Off Normal On 55 Color temperature mode to set the color temperature to Cool, Normal, Warm and Personal. When you adjust the following settings, Personal will be set automatically. Color alignment Cursor ◄ Cursor ► Red gain Green gain Blue gain Red offset Green offset Blue offset to decrease contrast to increase contrast with red with red to decrease contrast to increase contrast with green with green to decrease contrast to increase contrast with blue with blue to decrease brightness to increase brightness with red with red to decrease brightness to increase brightness with green with green to decrease brightness to increase brightness with blue with blue 19 English Sound Before you begin: You must set Home in Location. p. 26 Otherwise, personalized picture and sound settings will not be memorized after the unit goes into Standby mode. 1 Press (MENU) to display Home Menu and use ▲▼to select Sound, then press OK. 2 Use to select the item you want to adjust, then press OK. • The following sound settings can be configured. Depending on the sound source, some sound settings are not available. Picture Sound Setup Features USB Auto sound Equalizer DTS TruSurround Auto volume leveling Balance TV speakers Advanced sound Reset sound settings Standard On Off 0 Speakers EasyLink Auto sound to select the desired setting, then press OK (Standard, Movie, Music, Sports, News, and Personal) Equalizer to select the specific frequency and use ◄► to adjust the level, then press OK DTS TruSurround Enable DTS TruSurround to enhance your audio experience. Auto volume leveling Dynamically adjusts volume across different channels and sources to maintain a consistent level. Balance Adjust the balance of the right and left speakers to best suit your listening position. Select On to output sound from TV speakers, Off to manually turn off TV speakers and enable Digital Audio Output. TV speakers Speakers EasyLink uses HDMI-CEC to automatically speakers and direct sound to connected HDMI-CEC turn off TV compliant Home Theater System using HDMI-ARC or Digital Audio Port if it detects one. Advanced sound Digital output format Audio setting Audio Language Select the type of digital audio output: Bitstream, PCM. Select the audio mode from: Mono, Stereo, and SAP. For use of Analog TV only. You can select your preferred audio language when TV channel broadcasts multiple/dual audio languages. Reset sound Select to restore the default sound settings, while channel settings installation settings remain the same.