Philips 50PFL5602 User manual - Page 32
Dynamic contrast, Pixel Plus Ultra HD, Color alignment, Advanced settings
View all Philips 50PFL5602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
You may adjust picture quality and enhancement settings using Pixel Plus Ultra HD and Advanced settings sub menus. Auto picture Backlight Contrast Brightness Color Tint Sharpness Pixel Plus Ultra HD Advanced settings Picture format Mode selection Horizontal position Vertical position Dynamic contrast Off Color enhancement Minimum Black stretch Medium 120 PMR Maximum 4K UHD Upscaling Macro Dimming Noise reduction MPEG artifact reduction Dynamic To select the desired setting, then press OK contrast (Off, Minimum, Medium and Maximum) Color Off To set color enhancement to off enhancement On To make colors more vivid and bright Black To select the desired setting, then press OK stretch (Off, Minimum, Medium and Maximum) 120 PMR Off To set 120 PMR to Off On To make the video appear smoother 4K UHD To select the desired setting, then press OK Upscaling (Off, Minimum, Medium and Maximum) Macro To select the desired setting, then press OK Dimming (Off, Minimum, Medium and Maximum) Noise To select the desired setting, then press OK reduction (Off, Minimum, Medium and Maximum) MPEG artifact reduction To select the desired setting, then press OK (Off, Minimum, Medium and Maximum) Auto picture Backlight Contrast Brightness Color Tint Sharpness Pixel Plus Ultra HD Advanced settings Picture format Mode selection Horizontal position Vertical position Color alignment Mode Custom color management Red gain HDR mode Green gain Gamma Blue gain Blue stretch Red offset Film mode Green offset Blue offset Color alignment Mode To set the color temperature to Personal, Cool, Normal and Warm. When you adjust the following settings, Personal will be set automatically. Cursor Red gain To decrease red contrast Green gain To decrease green contrast Blue gain To decrease blue contrast Red offset To decrease red brightness Green offset To decrease green brightness Blue offset To decrease blue brightness Cursor To increase red contrast To increase green contrast To increase blue contrast To increase red brightness To increase green brightness To increase blue brightness 32 .English To select the desired setting, then press OK (Red, Yellow, Green, Cyan, Blue and Magenta) Custom color management Tint Saturation Brightness Cursor Cursor To rotate only selected color tint in clockwise direction To rotate only selected color tint in counterclockwise direction To decrease color To increase color with only selected with only selected color color To decrease To increase brightness with only brightness with only selected color selected color Off To set HDR mode to off HDR mode * Auto Automatically switches to a dedicated picture quality setting when receiving HDR signal Gamma To select the desired setting, then press OK (Very Dark Room, Dark Room, Normal, Bright Room and Very Bright Room) Blue stretch To select the desired setting, then press OK (Off, Minimum, Medium and Maximum) Film mode Off Auto To set film mode to off To optimize the picture recorded by the original film * HDR mode settings are only available on the following models: ࣭65PFL5602/F7 ࣭65PFL5602/F7 D ࣭55PFL5602/F7 ࣭50PFL5602/F7 Other models, such as 65PFL5602/F7 C, automatically switch to the decided picture settings upon receiving HDR signals. Your model number can be confirmed on the rating label applied on the rear cabinet. Note(s) • Mode selection is available only if -The external input modes are selected HDMI 1, HDMI 2 or HDMI 3. -The connected HDMI device is outputting a video signal. Continued on next page.