Philips 50PL9220D User manual - Page 31
To select connected devices and audio and video functions
View all Philips 50PL9220D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
7 Audio to Hi-Fi System (Digital) Using SPDIF A Connect audio cable from the SPDIF jack on the rear of the TV to the DIGITAL IN jack on the rear of the hi-fi system. Tip:SPDIF (Sony and Philips Digital Interconnect Format) is highly recommended for high quality digital sound output. To select connected devices and audio and video functions Select Connected Devices & Press the AV button repeatedly or select Source in the Settings menu (see p. 13) to select the connected devices' channels: AV1, AV2, AV3, HDMI, Side or TV, according to where you connected your devices. é Press the < or > button. " Press OK button. Select audio and video functions Most of the audio and video equipment from Philips' range of products can be operated with the remote control of your TV. Press one of the buttons after you pressed the SELECT button repeatedly according to the equipment you want to operate with this remote control. See Use of the remote control, p. 5. When no action is taken within 60 seconds, the remote control goes back to TV mode. POWER to switch to standby Æ∆ for pause or play Ê for stop, INFO display information MENU to switch the menu on or off - CH + for chapter, channel, track selection 0 to 9 digit entry, • tape index (VCR), select a DVD chapter, select a frequency (AMP) cursor < or > to select the next or the previous disc (CD) cursor ≤ or ≥ to select the previous or following track (CD) Notes: - If no action is being undertaken within 60 seconds, the remote control returns to TV mode. - After an action in the selected system mode, the remote control will remain in this mode for 60 seconds and will then return to TV mode or press the SELECT button to return to TV mode immediately. 23