Philips 558M1RY User manual - Page 17
PIP Size: When PIP is activated
![]() |
View all Philips 558M1RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2. Setting up the display [PBP]: Picture by Picture Open up a sub-window side-by-side of other signal sources. A B (main) When the sub source is not detected. A (main) Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode. If you expect to see full screen side by side, adjust your devices resolutions as pop up attention resolution, you will able to see 2 devices source screen project to this display side by side without black strips. Note the analog signal is not support this full screen in PBP mode. • PIP Size: When PIP is activated, there are three sub-window sizes to choose: [Small], [Middle], [Large]. BSmall Middle A Large (main) Top-Left B A (main) Bottom-Left A (main) B • Swap: The main picture source and the sub picture source swapped on the display. Swap A and B source in [PIP] mode: B A (main) ↔ A B (main) Swap A and B source in [PBP] mode: A B (main) B A ↔ (main) • Off: Stop MultiView function. Note When you do the SWAP function, the video and its audio source will swap at the same time. • PIP Position: When PIP is activated, there are four sub-window positions to choose. Top-Right Bottom-Right B A (main) A (main) B 15
![](/manual_guide/products/phillips-558m1ry-user-manual-29bbfba/17.png)