Philips 55PP9910 Quick start guide - Page 30

26 COMPATIBILITY INFORMATION FOR HD INPUTS Your set's HD inputs (HD INPUT-AV 3, HD INPUT-AV 4 and HD INPUT-AV 5) are designed to accept high-definition signal standards 480p, 480i, 720p and 1080i as specified by the Electronic Industries Association. Output standards may vary by manufacturer. Refer to the directions-for-use manual for the digital source equipment before connecting. Your TV's HD input jacks are compatible with some digital equipment having RGB outputs with "sync on green" or RGB with "separate H and V sync." As with HD component video signals, output standards may vary by manufacturer. Refer to the directions-for-use manual for the receiver before connecting. HD INPUT-AV 3 and 4 When the Inputs Are Used with Component Video Signals Y INPUT: 1.0 Vp-p (includes sync), 75 ohms Pr INPUT: 700m Vp-p, 75 ohms Pb INPUT: 700m Vp-p, 75 ohms NOTES: The Pb INPUT jack can also receive signals from outputs labeled Cb or B-Y. The Pr INPUT jack can also receive signals from outputs labeled Cr or R-Y. When the Inputs Are Used with RGB Video Signals G/Y: 1.0 Vp-p, 75 ohms (compatible with sync on green) R/Pr: 700 mVp-p, 75 ohms B/Pb: 700 mVp-p, 75 ohms H: 3 Vp-p ± 1.0 V, 1 kohm (when using separate H and V sync) V: 3 Vp-p ± 1.0 V, 1 kohm (when using separate H and V sync). HD INPUT-AV 5 This input accepts an HDMI connector. Audio jacks are provided for connecting a DVI device using a DVI to HDMI converter cable. HELPFUL HINTS • No industry standards have been established for HD television RGB signal systems, timing, synchronization, and signal strengths. The HD INPUT-AV 3 or 4 RGB inputs on your Philips TV will not be compatible with all digital equipment that offers RGB outputs. If the digital equipment you want to connect offers both component video and RGB, component video is the suggested type of connection to use. • Your TV's onscreen INSTALL submenu provides the option of switching the AV3 or 4 signal source between YPbPr and RGB color-space settings. The option is available only when you have selected the AV3 or 4 signal source (using the AV button on the remote or the Source Select button on the TV). The default setting for AV3 and 4 is YPbPr.