Philips 58PFL4609 User manual - Page 20

Watching Channels from an External Device Switching Each Input Mode can easily switch with the Remote Control between TV (DTV or Analog TV) and External Devices when they are connected to the Unit. 1 Turn On a Set-top Box or the Connected Device. ● The picture from the Set-top Box or the Connected Device might appear Automatically on the TV screen. If the picture does not appear ① Press S SOURCE Repeatedly to select the Set-top Box or the connected device and wait a few seconds till the Picture appears. e.g.) TV HDMI1 HDMI2 HDMI3 Video PC 11.1 HDMI1 DTV / Analog TV channel Video PC or Component HDMI2 HDMI3 ● Pressing H reverses the direction of the Input modes. ② Use the Remote Control for the Set-top Box or the Connected Device to select Channels to view. Access the Home menu 1 Press Q (MENU). Guide to Home menu d a e Watch TV Browse USB Browse PC b f Net TV Add new devices Setup c 20 .English Note(s) ● After selecting Add new devices, follow the on-screen instructions to select the correct device and connector. Lock or unlock your device from the Home menu This section describes how to lock or unlock specified device. 1 Press Q (MENU) on the remote control. 2 Use H I J K to select a device to lock or unlock. 3 Press U OPTIONS on the remote control. 4 Use H I to select Device lock or Device unlock, then press OK. ● If device lock is unlocked, Device lock will be displayed. If device lock is locked, Device unlock will be displayed and will be 5 displayed at the top right of the device icons. Enter your PIN. Change PIN L p. 33 ● Once you have set PIN, PIN input menu does not appear after the unit is Turned on. Enable or disable RC key forwarding from the Home menu This section describes how to enable or disable RC key forwarding for a particular device. 1 Press Q (MENU) on the remote control. 2 Use H I J K to select a device to enable or disable RC key forwarding. 3 Press U OPTIONS on the remote control. 4 Use H I to select Enable RC key forwarding or Disable RC key forwarding, then press OK. ● If RC key forwarding is set to off, Enable RC key forwarding will be displayed. If RC key forwarding is set to on, Disable RC key forwarding will be displayed and will be displayed at the top left of the device icons. Note(s) ● This function is available only when your devices are connected to this unit through HDMI cables and assigned to an HDMI port (HDMI 1 to HDMI 3) with Add new devices in the Home menu. a Watch TV b Net TV c Add new devices d Browse USB e Browse PC f Setup : Switches back to the TV source if another source is selected. : Accesses Net TV menus. : Adds new devices to the Home menu. : Accesses USB menus. : Accesses DLNA menus. : Accesses menus that allow you to change picture, sound and other TV settings.