Philips 65PFL6902 User manual - Page 20
Initial setup
View all Philips 65PFL6902 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
These operations are accessible by remote control. Some may also be accessible by the main unit's control panel. Initial setup This section will guide you through the unit's Initial setting which includes selecting a language for your on-screen menu, country, location and Autoprogram, which automatically scans and memorizes viewable channels. You can also set the network connection in this setting. Before you begin: Make sure the unit is connected to an antenna or cable. 1 After making all the necessary connections, press to turn on the unit. • It may take a few moments to turn on the unit for the first time. • Initial setup menu appears automatically after the unit is turned on. 2 Use to select the on-screen language, Voice guide, country, TV placement and location in the middle of the TV screen, then press OK. • You must set Home in location setting. Otherwise, Picture and Sound settings you adjusted will not be memorized after the unit goes into standby mode. 3 Use to select Skip or Next on network setup screen. 4 Use to select Wireless or Wired, then press OK. Installation This TV can be connected to your home network. Select your connection type. Wireless Wired 1 234 Skip 567 Wireless Wired If you have a wireless router, select Wireless to connect to the internet. If you connect with an Ethernet cable, select Wired to connect to the internet. • If you have a router with easy connect function, select Wireless and use to select Easy Connect, then press OK. • When you select On in the selection screen for Software update notification, A message will appear later if there is the latest software on the network server. 20 .English 5 Use to select the signal type. • If the TV is connected to a cable or satellite set-top box, select the 2nd one and skip to step 7. Installation Select "Antenna" to set up a TV signal from a cable TV wall jack or a standard TV antenna. Antenna Set-top box Select "Set-top box" to set up a TV signal from a cable TV box or satellite TV receiver. 1 23456 7 6 Use to select Antenna for TV channels or Cable for CATV channels, then press OK. Installation Make sure that you have attached your antenna or cable signal into the jack on the back of your TV labeled "ANTENNA IN". Antenna Cable Skip Now select either Antenna or Cable, using up/down key of the remote control. Once you have made your selection, press the 1 2 3456 OK button to proceed. 7 -When Antenna is selected, the TV detects antenna signals. It searches for DTV and analog TV channels available in your area. -When Cable is selected, the TV detects signals supplied by cable. It searches for DTV, analog TV and cable channels available in your area. • Auto programming will begin. Installation System searching. Please wait... Digital channels found: 0 Analog channels found: 0 Auto programming may take more than 20 minutes to complete. Digital channels will take longer Total progress: than Analog to find and program. Please wait until you see the Auto Programming complete message. 1 23456 Stop 7 Continued on next page.