Philips 6940LC User manual - Page 14
Turn Razor Head Assembly over so
View all Philips 6940LC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 ENGLISH C 2 Press the Razor Head Release Button (1) and remove Razor Head Assembly from the razor unit (2). C 3 Brush the inside of the razor housing. 4 C 5 Turn Razor Head Assembly over so that underside is exposed. Turn wheel of frame counterclockwise. 6 Remove the frame and brush clean. C 7 Remove and clean one cutter and comb at a time. Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored. 8 C 9 Separate the cutter from the comb. Only brush the cutter in an upward motion. Use the short bristled side of the brush. _6940LC_6900LC.indd 14 8/12/09 10:00:36 AM
14
ENGLISH
C
2
Press the Razor Head Release Button (
1
)
and remove Razor Head Assembly from
the razor unit (
2
).
C
3
Brush the inside of the razor housing.
4
Turn Razor Head Assembly over so that
underside is exposed.
C
5
Turn wheel of frame counterclockwise.
6
Remove the frame and brush clean.
C
7
Remove and clean one cutter and comb at
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
8
Separate the cutter from the comb.
C
9
Only brush the cutter in an upward motion.
Use the short bristled side of the brush.
_6940LC_6900LC.indd
14
8/12/09
10:00:36 AM