Philips 75PFL5704 User manual - Page 10
Installing the stands, Lifting the TV set, Open the battery cover by firmly sliding down.
View all Philips 75PFL5704 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installing the stands 1 Fasten the matching stand to the TV with 2 screws (included). 10 .English Lifting the TV set Carefully lift the TV set as shown in the illustration and place it onto a stable, level surface. 2 screws required 2 Fasten the other stand to the TV with 2 screws (included). 2 screws required 3 Both stands should now be securely fastened. 4 Remove the plastic bag. Installing the Batteries a b c AAA (1.5 V) x 2 1 Open the battery cover by firmly sliding down. 2 Insert 2 AAA (1.5 V) batteries matching the polarity indicated inside battery compartment of the remote. 3 Slide the cover back into position. Caution(s) ● For remote that have the battery cover on the front, please take care to slide the cover down BEFORE lifting it off to prevent accidentally breaking the tabs that hold it in place. Note(s) ● Remove the batteries if not using the remote for an extended period of time. Note(s) ● A wide open space is recommended for assembly. ● A Phillips-head screwdriver is required to fasten the stands to the TV set. ● When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit. ● To remove the stand from this unit, unscrew the phillips-head screws by reversing the procedure. Be careful not to drop the stand when you remove it. Continued on next page.