Philips 7FF2FPA Quick start guide (English) - Page 2

1. Connect (P6) Back Cover (P3) F&A(P2) What's in box (P5) 1. Connect (P6) (P10) GRAPHIC DEVELOPMENT MMD Product name PhotoFrame Project name 7FF2FPA PF QSG Project no. Finishing Folded sheet Scale 1:1 Size Speads 740 (W) x 203 (H) mm Size 148 (W) x 203 (H) mm Operator(s) Howard Yo Date amended July 31,2007 VERSION No. EN0.1 APPROVAL QC Lithographer Product Manager Date Check ARTWORK DOCUMENT Paper 140gsm White ArtPaper Numbers of colours 2Cx2C Pantone 3005c - - Black Spotcolor - - - - Aftertreatment - - - - Cropping Coating silk coated Varnishing Embossing Cutterguide Die-cut Binding Glue 1 Connect AA Attach the Stand AB Connect the power adaptor • Place the head of the stand in the socket. • Rotate counterclockwise until the stand clicks into place. CAUTION To help prevent damage, do not hold the frame by the stand. Grasp the frame firmly using two hands. • Connect the supplied power adaptor to the photo frame and then plug it to a power outlet. 2 Setup Locate the control keys • Control keys on the back of the frame and corresponding function icons on the front of the LCD display enable you to maneuver through the menus and customize your settings. NOTE Not all of the icons will appear on the screen at the same time. Back/Left Next/Right Slide Mode Show/Hide menu Return Turn on AA the PhotoFrame PhotoFrame (back) Up Down Browse Mode Photo menu Clock AB Choose language MainMenu OK Enter Main Menu Thumbnail Mode Add/Cancel photo Up Down Right Left Power button PhotoFrame (front) Startup screen PhotoFrame (back) PhotoFrame (front) Language Setting • Push the power button on the back of the frame for approximately 2 seconds. Menu buttons are on the back of the photo frame. Icons indicate location of buttons found on the back of the panel. • Press , keys to select SETTINGS. Press key to enter. • Press , keys to select Language settings. Press key to enter. • Press , keys to select. Press key to set your language. • Use key to return and exit SETTINGS. 3 Enjoy View pre-stored photos Browse Mode Thumbnail Mode Slide Mode There are 3 view modes to choose from: Browse Mode: manual viewing of photos one by one. Thumbnail Mode: list of all photos. Slide Mode: automatic, rotating display of photos. • Press , keys to select PHOTO. Press key to enter. • Press , keys to select Internal Memory. Press key to enter. • Press , keys to select Album. Press key to enter Thumbnail Mode, and press key to enter Slide Mode, press key to enter Browse Mode. • You may also enter Slide Mode directly by pressing key from the main menu. View photos from your memory card Photo display (underside) left slot right slot Use left slot for Secure Digital/MMC/ xD/Memory Stick card. Slide card with end first and face up. User right slot for Compact Flash card. Slide card with end first and face down. • Press , keys to select PHOTO. Press key to enter. • Press , keys to select inserted memory card. Press key to enter. • Press , keys to select Album. Press key to enter Thumbnail Mode,After a few seconds, photos in your memory card will appear. • Then press key to enter Slide Mode, press key to enter Browse Mode. If the memory card is inserted before the power is ON, Slideshow will automatically start. Copy or copy all photos from your memory card Thumbnail Mode Copying photo mode Copied photo mode Copying photo mode • In the thumbnail mode, use , keys to select photo. • Press key to add/cancel selected photos.After selecting, press key to show photo menu. • Press , keys to select Copy to or Copy all to your memory card. • Press key to copy. Photo frame will keep a resized copy of the photo until it's internal memory is full (message shown). Delete or Delete all photos from your memory card Thumbnail Mode Deleting photo mode Deleted photo mode Deleting photo mode • In the thumbnail mode, use , keys to select photo. • Press key to add/cancel selected photos.After selecting, press key to show photo menu. • Press , keys to select Delete or Delete all from your memory card. • Press key to delete. Copy/ Delete photos by connecting to your computer USB port You may copy, delete and move photos by connecting the photo framewith the computer through the provided USB cable. • Turn on the power of the photo frame, and then plug the smaller end of the USB cable into the USB port on the underside of the photo frame. • Plug the other end of the USB cable into the USB port of the computer. Set Time and Date functions Set Time/Date mode Set Time mode Set Date mode Set Time functions • Press , keys to select SETTINGS. Press key to enter. • Press , keys to select Time and Date. Press key to enter. • Press , keys to select Time to setup. Press key to set • hour and minutes. Press key to return main menu and exit SETTINGS. Set Date functions • Press , keys to select SETTINGS. Press key to enter. • Press , keys to select Time and Date. Press key to enter. • Press , keys to select Date to setup. Press key to set year, month and day. • Press key to return main menu and exit SETTINGS. CAUTION Time and date settings are erased if the photo frame is unplugged.