Philips 9195XL User manual - Page 12

22 ENGLISH Cleaning C ◗ The tap symbol on the back of the razor indicates that the razor can be rinsed under running tap water. ◗ Regular cleaning guarantees better shaving results. ◗ Always switch Razor OFF and remove from charging stand before cleaning. ◗ Never clean, remove or replace head assembly while motor is on. ◗ Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage precision-made slotted combs. ◗ Do not use razor if combs are damaged or broken. Facial injury may occur. ◗ Unplug the charging stand. The charging stand may be wiped clean using a damp cloth. C1 The faucet symbol will start blinking after each shave to remind you that the razor needs to be cleaned. Cleaning: Razor Heads The easiest and most hygienic way to clean the razor heads is to rinse them after each use or at least once a week with hot water: Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS. ◗ Regular cleaning guarantees better shaving results. ENGLISH 23 1 C2 Always turn razor OFF, unplug from outlet and remove cord from razor or charging stand before cleaning. Press the Razor Head Release Button, flip open the Razor Head Assembly. C 3 Clean inside razor heads and hair chamber by running under hot water. C 4 Clean outside of Razor Head Assembly by running under hot water. 5 C6 Close the Razor Head Assembly and shake off excess water. Open Razor Head assembly again and leave open to air dry. NOTE: Do not wipe or dry the shaving heads with a towel or tissue.This could damage the shaving heads. C 7 If the shaving unit becomes detached from the shaver, you can easily reattach it.