Philips AJ210 User Manual - Page 4

English Controls Power supply Supplied accessory - 1 X certified AC 7.5V adapter (Input: 220-230V ~50Hz 30mA, Output: 7.5V 250mA) Controls (see 1) 1 ALM 1/ ALM 2 - activates/confirms ALARM 1 /ALARM 2 time setting - switches off the alarm 2 RADIO ON/OFF - switches the radio on/off - switches the set on or to standby - stops the active buzzer or radio alarm for 24 hours - switches off the sleep timer 3 TIME SET - activates/confirms clock/date setting 4 AUTO SCAN - programs preset radio stations 5 DATE - displays month and day information in standby mode - changes display order between month and day during setting time 6 RADIO•BUZ - selects alarm mode: radio or buzzer 7 REPEAT ALARM/BRIGHTNESS CONTROL - pushes to switch off alarm for a 9-minute period - changes the brightness of the display illumination 8 LCD Display - shows the clock/ alarm time or radio and weather forecast information 9 SLEEP/ALARM RESET - switches off radio for timer mode - adjusts timer options for radio playback - stops the active buzzer or radio alarm for 24 hours 0 PRESET +/- selects a preset radion station ! TUNING +/- tunes to radio stations - adjusts clock / alarm time @ VOL- adjusts sound level # Battery compartment - opens to insert 4 x 1.5V AAA batteries $ RESET - press if the set / display does not react to operation of any button % (ºC ºF) Slide Switch - selects between Centigrade (ºC) or Fahrenheit (ºF) temperature unit display ^ DC 7.5V - socket for AC/DC 7.5V adapter & Pigtail - FM antenna to improve FM reception Power supply Make sure you remove the plug from the set and wall outlet before inserting batteries. Batteries (not supplied) 1 Open the battery door and insert 4 batteries, typed AAA with the correct polarity as indicated by the "+" and "-" symbols inside the compar tment. 2 Replace the battery door, making sure the batteries are firmly and correctly in place.The set is now ready to operate. Batteries contain chemical substances, so they should be disposed of properly. Mains Adapter. Note: Remove the batteries before you use the AC adapter. 1 Connect the mains adapter to the set's DC 7.5V socket and to the power socket. Helpful hints: To avoid damage to the set, use only the adapter supplied! The type plate is located on the bottom of the set. This set complies with the radio interference requirements of the European Community.