Philips AJ3965 User manual - Page 9
Installation - clock
View all Philips AJ3965 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English POWER SUPPLY AND DEMO MODE 1. Check if the power voltage, shown on the type plate on the bottom of the set, corresponds to your local power supply. If it does not, consult your dealer or service center. 2. Connect the power plug into the wall outlet.The power supply is now switched on and the display will show the PHILIPS demo mode. ™ PH..IL ..IPS scrolls across the display continuously. • Press any control (with the exception of REPEAT ALARM/ BRIGHTNESS CONTROL on the set) to exit the demo mode. 3. To disconnect the set from the power completely, remove the plug from the wall outlet. SELF-POWERED BACK-UP The self-powered back-up conveniently allows your day, alarm and clock time settings to be stored for up to 3 minutes when there is a power interruption e.g. AC power failure. The complete CD clock radio and illumination will be switched off. As soon as the power supply returns, the display will indicate the correct time. • If power supply returns after 3 minutes, the display will show the PHILIPS demo mode and you will need to re-enter the day and clock time. INSTALLATION BASIC FEATURES Illumination brightness 1. Check if the SET control is turned to CLOCK position. 2. Press REPEAT ALARM/ BRIGHTNESS CONTROL once or more - The brightness of the display will change in this sequence: LOW ™ MEDIUM ™ BRIGHT ™ LOW... Volume Press VOLUME 4or 3 to adjust the volume level. The volume level vo: is indicated as a number from 0-32. MMAAOOLLDDAAEERR//MOMOFF11FF 1 WWSSLELEEEEEEKEKPPEEEENNRRDD-- SSLLEEEEPP SSEETT DDAAYY AALLAARRSSMMEETT11 CCLLTTOOIIMCMC2KE2KE ZZ CD RADIO FM PLAY/PAUSE CD/RADIO RCDADDIG/ITOITUANOLNR/ABDAINOD OFF OPEN • CLOSE ALARM 1 MODE/OFF 2 ZZ VOLUME RADIO PRESET 9