Philips AJT600 User manual - Page 7

Set time 1 Rotate the Third Knob to "SET TIME" to activate clock setting mode. »» Hour and minute digits blinks. 2 Rotate the First Knob to adjust the hour. 3 Rotate the Second Knob to adjust the minute. 4 Press OK on the First Knob to confirm. »» The setting time is displayed. 5 Rotate the Third Knob to CLOCK after setting. »» The hour and minute digits stops blinking. Turn on The clock radio turns on automatically once your plugged in. 4 Play from Bluetooth device Note •• The effective operation range between the Bluetooth speaker and the paired device is approximately 10 meters (30 feet). •• Keep this Bluetooth speaker away from other electronic devices that may cause interference. •• Make sure that the Third Knob switches to CLOCK before setting. 1 Press SOURCE repeatedly to select Bluetooth source. »» on the display panel flashes. 2 Activate the Bluetooth function in your Bluetooth device (see the device user manual). 3 Select "AJT600" displayed on your device for pairing. »» If connection is successful, the Bluetooth speaker beeps twice and steadily on. 4 Start music play on your Bluetooth device. »» If Bluetooth disconnected, the music will pause. Press on the Bluetooth device to start play again. Bluetooth reset In Bluetooth mode, press OK on the first knob for over 5 seconds to erase all pairing informations. »» "BT RESET" displayes on the panel. • The Bluetooth speaker enters Bluetooth mode automatically after erase completed. 7 EN