Philips AT895 User manual - Page 21

e.g. Philips Norelco Shaving Head Cleaning Spray

Get Philips AT895 PDF manuals and user guides View all Philips AT895 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

ENGLISH 21 C 5 Remove and clean one set of cutters and combs at a time. C 6 Separate the cutter from the comb and clean it with the short bristled side of the brush supplied. Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored. C 7 Clean the inside and outside of the comb with the brush supplied. For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Philips Norelco Shaving Head Cleaning Spray, Model HQ110 or alcohol) and lubricated with one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads. C 8 Replace the set back into the Razor Head Assembly. Make sure that the two pointy edges of the head fit exactly into the recesses. 9 Repeat the process for the other two sets of cutters and combs.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
ENGLISH
C
5
Remove and clean one set of cutters and
combs at a time.
C
6
Separate the cutter from the comb and
clean it with the short bristled side of the
brush supplied.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C
7
Clean the inside and outside of the comb
with the brush supplied.
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Philips Norelco Shaving Head Cleaning Spray,
Model HQ110 or alcohol) and lubricated with
one drop of mineral oil (in the center of the head).
This helps prevent wear of the shaving heads.
C
8
Replace the set back into the Razor Head
Assembly.
Make sure that the two pointy edges of the head
fit exactly into the recesses.
9
Repeat the process for the other two sets
of cutters and combs.
21