Philips B97 User manual - Page 13

1 Dock your wireless speakers into the main unit to charge. 2 Turn on the main unit. » During charging, the LED on the wireless speaker lights up red. » When fully charged, the LED on the wireless speaker turns o . Note • You can also charge the wireless speakers through the USB-C charging port by using a USB-C charging cable. • It may take around 2 hours to fully charge the wireless speakers. • Battery performance varies due to many factors including volume, sound setting and media played. Connect to Wi-Fi (Wireless Operation) (For iOS and Android version) By connecting this unit and mobile devices (such as iPad, iPhone, iPod touch, Android phones, etc.) to the same Wi-Fi network, you can then use the Philips Sound app powered by DTS Play-Fi to control the soundbar to listen to audio les. 1 Connect your phone or tablet to the same Wi-Fi network that you want to connect your soundbar. 2 Download and install the Philips Sound app powered by DTS Play-Fi on your device. * Make sure your router is turned on and working properly. 3 Press and hold the (Wi-Fi) button located on the back cabinet for 8 seconds to trigger the Wi-Fi connection. » Until the speaker makes a second tone and then release the button. 4 Wait until the Wi-Fi LED indciator on the front cabinet goes from a fast blink to a slow pulse. When it begins to slow 12 EN pulsing indicating that the speaker is entering the Wi-Fi setup mode. 5 Launch the Philips Sound app powered by DTS Play-Fi. Follow the instructions in the app to connect this product to your Wi-Fi network. » If the connection succeeds, PLAY-FI displays on the display panel. Note For iOS version only Wi-Fi network used by iPhone should be switched temporarily to Play-Fi device AP and restart Philips Sound app to complete the product's Wi-Fi setup. See the steps below: • Go to Settings. • Select Wi-Fi setting. • Select the Play-Fi • Return to Philips device in the Wi-Fi Sound app to setup. continue the setup. 6 After successful Wi-Fi connection, the Wi-Fi LED indicator on the front cabinet will stop pulsing and turn solid. Once you set up this product on your Wi-Fi network, you can control it from any smartphone or tablet on the same network. » When using the app to play music, the display panel will show PLAY-FI.