Philips BDL6551V User manual - Page 37

Film Mode, Minus, Scan Conversion, Progressive, Ir Control, Set/plus, Normal, Primary, Secondary,

Page 37 highlights

User Manual BDL6551V FILM MODE Note: For VIDEO, S-VIDEO, COMPONENT, and HDMI (video mode) inputs only. Choose to turn on or off the film mode frame conversion function. Use the PLUS/MINUS button to toggle between • AUTO - Enable the film mode frame conversion function for movies and motion pictures. The monitor converts a 24 frames-per-second (24 fps) input signal format to DVD video signal format. Once this function is enabled, it is recommended that you set the SCAN CONVERSION function to PROGRESSIVE. • OFF - Disable the film mode frame conversion function. This mode is suitable for TV broadcasting and VCR signals. IR CONTROL Select the operation mode of the remote control when multiple BDL6551V monitors are connected via the RS232C connection. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between • NORMAL - All monitors can be operated normally by the remote control. • PRIMARY - Designate this monitor as the primary monitor for remote control operation. Only this monitor can be operated by the remote control. • SECONDARY - Designate this monitor as the secondary monitor. This monitor can not be operated by the remote control, and will only receive the control signal from the primary monitor via the RS232C connection. • LOCK - Lock the remote control function of this monitor. To unlock, press and hold the DISPLAY button on the remote control for 5 seconds. KEYBOARD CONTROL Choose to enable or disable the function of the keyboard (control buttons) on the monitor. Use the PLUS/MINUS button to toggle between • LOCK - Disable the keyboard. • UNLOCK - Enable the keyboard. TILING Note: For the VGA input only. With this function you can create a single large screen matrix (display wall) that consists of up to 25 BDL6551V monitors (5 monitors each on the vertical and horizontal sides). This requires you to connect each BDL6551V monitor in a daisy-chain configuration. Example: 2 x 2 screen matrix (4 monitors) 5 x 5 screen matrix (25 monitors) H MONITORS = 2 H MONITORS = 5 V MONITORS = 2 V MONITORS = 5 H MONITORS H MONITORS POSITION POSITION V MONITORS V MONITORS RETURN TO THE CONTENTS

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

User Manual BDL6551V
RETURN TO THE CONTENTS
FILM MODE
Note: For VIDEO, S-VIDEO, COMPONENT, and HDMI (video mode) inputs only.
Choose to turn on or off the film mode frame conversion function.
Use the
PLUS
/
MINUS
button to toggle between
AUTO
- Enable the film mode frame conversion function for movies and motion pictures. The monitor
converts a 24 frames-per-second (24 fps) input signal format to DVD video signal format. Once this
function is enabled, it is recommended that you set the
SCAN CONVERSION
function to
PROGRESSIVE
.
OFF
- Disable the film mode frame conversion function. This mode is suitable for TV broadcasting and
VCR signals.
IR CONTROL
Select the operation mode of the remote control when multiple BDL6551V monitors are connected via the
RS232C connection.
Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to toggle
between
NORMAL
- All monitors can be operated normally by the remote control.
PRIMARY
- Designate this monitor as the primary monitor for remote control operation. Only this
monitor can be operated by the remote control.
SECONDARY
- Designate this monitor as the secondary monitor. This monitor can not be operated by
the remote control, and will only receive the control signal from the primary monitor via the RS232C
connection.
LOCK
- Lock the remote control function of this monitor. To unlock, press and hold the
DISPLAY
button on the remote control for 5 seconds.
KEYBOARD CONTROL
Choose to enable or disable the function of the keyboard (control buttons) on the monitor.
Use the
PLUS
/
MINUS
button to toggle between
LOCK
- Disable the keyboard.
UNLOCK
- Enable the keyboard.
TILING
Note: For the VGA input only.
With this function you can create a single large screen matrix (display wall) that consists of up to 25
BDL6551V monitors (5 monitors each on the vertical and horizontal sides). This requires you to connect
each BDL6551V monitor in a daisy-chain configuration.
Example:
H MONITORS
V MONITORS
2 x 2 screen matrix (4 monitors)
H MONITORS = 2
V MONITORS = 2
5 x 5 screen matrix (25 monitors)
H MONITORS = 5
V MONITORS = 5
H MONITORS
V MONITORS
POSITION
POSITION