Philips BM5B/37 User manual - Page 13

2 Hold GROUP on a second speaker for 3 seconds (The slave). 3 Wait for 15 to 30 seconds for connection setup. 4 Repeat steps 1 to 3 to add more slave speakers one by one. Note •• You can only add slave speakers one by one. Each time when you add a slave speaker, first press and hold GROUP on the master speaker until the indicator on the button flashes and the speaker beeps. •• If the signal strength indicator on a slave speaker shows that the signal is poor, move it closer to the master speaker. You can add any of the following speakers into the existing group or create a new group with them: • A speaker with factory default settings • A master speaker that has no slave connected to it • A slave speaker that is disconnected from its master (with the GROUP indicator flashing) Connect a Bluetooth-enabled device to the master and play to the whole group Note •• Music play pauses when there is an incoming call or video recording is in progress on the connected mobile phone. 1 If no Bluetooth connection has been set up with the master speaker before, pair and connect a Bluetooth-enabled device to the master speaker (see 'Connect a Bluetoothenabled device' on page 9). 2 After successful Bluetooth connection, play music on the Bluetooth device. »» Music streams from your Bluetooth device to the whole group of speakers. Change master You can change the current master in a group easily. For example, when the Bluetooth connection with the current master speaker is lost, you can set the closest slave speaker as the master. 1 Press on a slave speaker. »» The indicator on the speaker flashes blue, while that on the previous master speaker turns off. »» The GROUP indicators on both speakers start flashing until the new master speaker sets up connection with its slaves. »» The volume indicator on the speaker turns white while that on the previous master speaker turns green. 2 Pair and connect your Bluetooth-enabled device with the new master speaker (see 'Connect a Bluetooth-enabled device' on page 9). 3 After successful Bluetooth connection, play music on the Bluetooth device. »» Music streams from your Bluetooth device to the whole group of speakers. EN 11 English