Philips BT3500B User manual - Page 8

Switch to standby mode • In Bluetooth mode, if Bluetooth connection is invalid or music playback is stopped for 15 minutes, this speaker switches to standby mode automatically. • In Audio-in mode, if the audio-in cable is disconnected or music playback is stopped for 15 minutes, this speaker switches to standby mode automatically. »» To return to Bluetooth or Audio-in mode, slide the source selector to OFF first, then to or AUDIO IN position. 4 Use Bluetooth devices With this speaker, you can listen to audio from Bluetooth-enabled devices and control the incoming call through Bluetooth. Connect a device Note •• Make sure that your Bluetooth device is compatible with this speaker. •• Before pairing a device with this speaker, read its user manual for Bluetooth compatibility. •• The speaker can memorize a maximum of 4 paired devices. •• Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all other Bluetooth devices. •• Any obstacle between this speaker and a Bluetooth device can reduce the operational range. •• Keep away from any other electronic device that may cause interference. Connect a device manually Note •• The operational range between this speaker and a Bluetooth device is approximately 10 meters (30 feet). 1 Slide the source selector to . »» The LED indicator flashes in blue. 2 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices (refer to the user manual of the device). 3 When [BT3500] is displayed on your device, select it to start pairing and connection. If necessary, enter default password "0000". 6 EN