Philips BT50B User manual - Page 7
Play from, Bluetooth, devices
View all Philips BT50B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4 Play from Bluetooth devices With this speaker, you can listen to audio from Bluetooth-enabled devices. Note •• The speaker can memorize a maximum of four paired devices.The fifth paired device will replace the first one. •• Any obstacle between this speaker and a Bluetooth device can reduce the operational range. •• Keep away from any other electronic device that may cause interference. •• The operational range between this speaker and a Bluetooth device is approximately 10 meters (30 feet). •• Make sure that no audio input cable is connected to the AUDIO IN socket. Connect a device 1 Slide the source selector to . »» The LED indicator flashes blue. 2 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices that can be paired (refer to the user manual of the device). 3 Select [Philips BT50] displayed on your device for pairing and connection. If necessary, input "0000" as the pairing password. »» After successful pairing and connection, the speaker beeps twice, and the LED indicator turns solid blue. • If you cannot find [Philips BT50] on your device, press and hold PAIRING for more than three seconds until you hear triple beeps. 4 Play audio on the Bluetooth device. Tip •• You can use your Bluetooth device to control play. LED indicator (blue) Indicator Fast flashing (2Hz) Slow flashing (1Hz) Solid blue Bluetooth connection status Pairing Connecting Connected Disconnect a device • Press and hold PAIRING for more than three seconds; »» The speaker beeps for three times. • Disable Bluetooth on your device; or • Move the device beyond the communication range. »» The speaker beeps twice, and the LED indicator flashes blue. Note •• Before connecting another Bluetooth device, disconnect the current device first. EN 5