Philips CD3653Q Quick start guide - Page 2

What's in the box Base station with bracket for CD360 OR Belt clip Handset CD365 Line cord* Power supply User manual Guarantee Quick Start Guide Note • In some countries, you have to connect the line adaptor to the line cord, then plug the line cord to the line socket. • In multi-handset packs, there are additional handsets and chargers with power supply units. Caution • Use only the supplied batteries and adaptor 1 Connect Connect the base station 1 Connect the output plug of the power socket to the bottom of the base station. 2 Connect the power socket to a standard wall outlet. 3 Connect the telephone line cord to the phone socket at the bottom of the base station and the wall phone socket. 2 Install Install the handset CD365 1 The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. 2 Place the handset on the base station to power up. Note: Charge the batteries for 24 hours before first use. For more information on the battery icon status, see the User Manual. 3 Enjoy Make a call 1 Press flash TALK and dial the phone number; or 2 Dial the phone number and press flash TALK to dial out the call. Answer a call When the phone rings, press flash TALK or to answer the call. End a call Press . exit END Adjust the earpiece volume Press call ID or Ph.Book to adjust the volume during a call. Set the handset's ringtone 1 Press menu. 2 Select [PERSONAL SET] > [HANDSET TONES] > [RING TONES], then press [OK] to confirm. 3 Select a ringtone, then press [OK] to confirm. » The setting is saved. Add a record 1 Press menu. 2 Select [PHONEBOOK] > [NEW ENTRY], then press [OK] to confirm. 3 Enter the name then press [OK] to confirm. 4 Enter the number, then press [OK] to confirm. Call from the phonebook 1 Press Ph.Book to access the phonebook. 2 Select a contact in the phonebook list. 3 Press flash TALK to make the call.