Philips CSS2123/F7 User Manual - Page 12
Product specifications, Troubleshooting - dimensions
View all Philips CSS2123/F7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
8 Product specifications 9 Troubleshooting Note •• Specifications and design are subject to change without notice. Amplifier • Total output power: • Europe/Asia Pacific/China/Russia/India: 60W RMS (30% THD) • Latin America: 48W RMS (10% THD) • Frequency response: 20 Hz-20 kHz / ±3 dB • Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) • Input sensitivity: • AUX: 600 mV • Music iLink: 250 mV Audio • S/PDIF Digital audio input: • Coaxial: IEC 60958-3 • Optical:TOSLINK Main unit •• Power supply: 110-240 V~, 50-60 Hz •• Power consumption: 20 W •• Standby power consumption: ≤ 0.5 W •• Speaker impedance: 4 ohm woofer, 4 ohm tweeter •• Speaker drivers: 25 x 120 mm (1 x 5") woofer, 38 mm (1.5") tweeter •• Frequency response: 150 Hz-20 kHz •• Dimensions (WxHxD): 708 x 47 x 65 mm •• Weight: 1.03 kg Subwoofer • Impedance: 8 ohm • Speaker drivers: 130 mm (5.25") woofer • Frequency response: 20 Hz-150 Hz • Dimensions (WxHxD): 165 x 240 x 295 mm • Weight: 2.6 kg • Cable length: 3 m Remote control batteries • 1 x CR2025 10 EN Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/suppor t. Sound No sound from SoundBar speakers. • Connect the correct audio cable from your SoundBar to your TV or other devices. • On your SoundBar remote control, press the Source buttons to select the correct audio input. • Make sure that the SoundBar is not muted. Press VOL +/- to restore the sound (see 'Adjust the volume' on page 9). Distorted sound or echo. • If you play audio from the TV through the SoundBar, make sure that the TV is muted.