Philips DC190 Quick start guide - Page 2

2 Setup A Set clock 1 In standby mode, press and hold TIME SET/AUTO SCAN for 2 seconds. » The hour digits begin to blink. 2 Press TUNING +/- to set the hour. 3 Press TIME SET/AUTO SCAN. » The minute digits begin to blink. 4 Press TUNING +/- to set the minute. 5 Press TIME SET/AUTO SCAN to confirm. » The week day digits begin to blink. 6 Press TUNING +/- to set the week day. 7 Press TIME SET/AUTO SCAN to confirm. B Set the alarm timer 1 Ensure that you have set the clock correctly. 2 Press and hold ALARM 1 or ALARM 2 for 2 seconds. » or and hour digits begin to blink. 3 Press TUNING +/- repeatedly to set the hour. 4 Press ALARM 1 or ALARM 2 to confirm. » or and minute digits begin to blink. 5 Repeat steps 3-4 to set the minute. 6 Repeat steps 3-4 to select whether to ring alarm on weekdays or at weekend. » "L XX(volume level)" begins to blink. 7 Repeat steps 3-4 to set the maximum alarm volume. 2 Setup Set alarm mode 1 Adjust the WAKE TO iPod/RADIO/ BUZZ control to select the source for the alarm. » When the alarm time comes, the selected iPod, radio or buzzer turns on. Activate and deactivate the alarm timer 1 Press ALARM 1 or ALARM 2 repeatedly to activate the timer. » If the timer is activated, or is displayed. • To deactivate the alarm timer, press ALARM 1 or ALARM 2 repeatedly until is displayed. » If the timer is deactivated, or disappears. Repeat alarm 1 When the alarm rings, press REPEAT ALARM/BRIGHTNESS CONTROL. » The alarm repeats ringing minutes later. E Tip • You can press TUNING+/- to adjust interval to repeat alarm. Stop alarm ring 1 When the alarm rings, press the corresponding ALARM 1 or ALARM 2. » The alarm stops but the alarm settings remain. 23 Enjoy A Play from iPod 1 Push to open the dock compartment. 2 Place the iPod in the dock. 3 Press SOURCE repeatedly to select iPod source. » The connected iPod plays automatically. • To pause/resume play, press . • To skip to a track, press / . • To search during play, press and hold / , then release to resume normal play. B Program and listen to radio stations 1 In the tuner mode, press and hold TIME SET/AUTO SCAN for more than 2 seconds to activate automatic program mode. » All available stations are programmed in the order of waveband reception strength. » The first programmed radio station is broadcast automatically. 2 Press PRESET +/- to select a preset number. E Tip • Detailed functions and features are described in the user manual.