Philips DVD951AT98 User manual - Page 12
Preparation
View all Philips DVD951AT98 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English Preparation General notes ¶ Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. ¶ Please refer to the manuals of your TV,VCR, Stereo System or other devices as necessary to make the best connections. ¶ For better sound reproduction, connect the player's audio out jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See 'Connecting to optional equipment'. Caution: - Do not connect the player's audio out jack to the phono in jack of your audio system. - Do not connect your DVD-player via your VCR. The DVD image could be distorted by the copy protection system. Connecting to a TV Component Video (Y CB CR) connection 1 Connect theY, CB, CR out jacks on the DVD-player to the corresponding in jacks on the TV using optional Y, CB, CR cable (Z). 2 Connect the Left and Right audio out jacks to the audio left/right in jacks on the TV (A). S-Video (Y/C) connection 1 Connect the S-Video out jack on the DVD-player to the S- Video in jack on the TV using an optional S-Video cable (Y). 2 Connect the Left and Right audio out jacks to the audio left/right in jacks on the TV (A). Video CVBS connection 1 Connect the Video out (CVBS) jack on the player to the video in jack on the TV using the video cable supplied (X). 2 Connect the Left and Right audio out jacks to the audio left/right in jacks on the TV (A). TV AX Y Z Connecting to optional equipment Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround 1 Connect the Left and Right audio out jacks of the DVD player to the audio left and right in jacks on your amplifier, receiver or stereo system, using the optional audio cable (A). Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2 and DTS) 1 Connect the player's digital audio out jack (optical G or coaxial F) to the corresponding in jack on your amplifier. Use an optional digital (optical G or coaxial F) audio cable. 2 You will need to activate the player's digital output (see 'Personal Preferences'). Digital Multi-channel sound The digital multi-channel connection provides the best sound quality. For this you need a multi-channel A/V receiver that supports one or more of the audio formats supported by your DVD player (MPEG 2, Dolby Digital™ and DTS). Check the receiver manual and the logos on the front of the receiver. AMPLIFIER TV G F A X Y Z MAINS DIGITAL AUDIO OUT PCM/MPEG2/AC3/DTS SURROUND CENTER FRONT L L OPTICAL COAXIAL R R SURROUND SUB WF FRONT MULTICHANNEL AUDIO OUT L 1 R 2 CVBS AUDIO OUT S-VIDEO CR CB Y VIDEO OUT Warning: Due to DTS Licencing agreement, the digital output will also be in DTS digital out when DTS audio stream is selected. MAINS DIGITAL AUDIO OUT PCM/MPEG2/AC3/DTS SURROUND CENTER FRONT L L OPTICAL COAXIAL R R SURROUND SUB WF FRONT MULTICHANNEL AUDIO OUT L 1 R 2 CVBS AUDIO OUT S-VIDEO CR CB Y VIDEO OUT 12 PREPARATION