Philips DVDR520H Quick start guide - Page 1
Philips DVDR520H Manual
View all Philips DVDR520H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
QUICK USE GUIDE 1 CONNECT THE DVD RECORDER DVDR 520H Switch on the TV set and select the correct video input. Press the [SYSTEM MENU] button to adjust your peference setting of this DVD recorder. Connect the antenna cable from the wall antenna outlet to the RF IN terminal on the back of the DVD recorder. Use another antenna cable to connect the DVD recorder's RF OUT terminal to the antenna in terminal at the back of your TV set. Use AUDIO/VIDEO cables (red/white/yellow) to connect the DVD recorder's AV OUT termianls to the AV IN terminals at the back of your TV set. Connect the power cable from the DVD recorder's AC IN terminal to the power outlet. 2 PREPARE THE REMOTE CONTROL Press [p] [q] to select an item in the menu. Press [u] to access the selected item's options. Press [OK] to confirm your selection. Language menu appears. OSD lanuage: select on-screen display language. System menu appears. Video output: sets video output TV Type: sets the TV type Date: set the system date using the numbered buttons. Time: set the system time using the numbered buttons. TV tuner menu appears. TV channel search: Go to "Utilities" and then "start scan." Press [OK] to start automatic TV channel scan to search and store available channels. 3 START INSTALLATION Press [STANDBY-ON ] to switch on the DVD recorder. When completed, press [SYSTEM MENU] to exit the menu. The DVD Recorder is ready for use! NO PICTURES! Check if Video Input of the TV set is switched to "AV" and press [CHANNEL ] button to select the right channel. NO SOUND! Check if the audio L/R jacks on the recorder are con- nected to the TV set, stereo system or receiver.