Philips DVP3345V Quick start guide - Page 2

1 Connections Connection to an External Tuner A Before Connecting Disconnect the power cords of the devices from the AC outlet. B Connecting Make the connection as illustrated below. This DVD/VCR does not have a tuner input jack. To record TV programs on your DVD/VCR, you need to connect this DVD/VCR to an external tuner device (e.g., set top box, cable box or satellite receiver) that has audio/video output jacks. Back of TV TV Signal 1 RF coaxial cable (not supplied) 2 ANT. IN RF coaxial cable (not supplied) 6 Video Cable (not supplied) AUDIO IN L R VIDEO IN Audio Cable (not supplied) 5 IN OUT AUDIO OUT R L VIDEO OUT 4 External tuner 3 DIGITAL AUDIO OUT DVD AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT Y DVD/VCR VCR AUDIO OUT AUDIO IN L L L COAXIAL R CB / PB R R VIDEO OUT VIDEO IN CR / PR Video Cable (supplied) Audio Cable (supplied) DVD/VCR 1 Connect a TV signal to the IN jack on the external tuner. 2 Use an RF coaxial cable (not supplied) to connect the OUT jack on the external tuner to the ANT. IN jack on the TV. 3 Connect the red and white audio cable (supplied) to the red and white AUDIO OUT jacks on the external tuner and to the red and white VCR AUDIO IN jacks on the DVD/VCR. 4 Connect the yellow video cable (supplied) to the yellow VIDEO OUT jack on the external tuner and to the VCR VIDEO IN jack on the DVD/VCR. 5 Connect another red and white audio cable (not supplied) to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the TV. 6 Connect another yellow video cable (not supplied) to the DVD/VCR VIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV. If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available stereo audio/video RF modulator. Refer to the manual accompanying the modulator for more information. 7 Connect the power cords of the TV and the DVD/VCR to a power outlet. Turn on the TV and set it to the correct Video In channel. For additional connection diagrams, see the accompanying User Manual. E8E20UD_QSG_EN.indd 2 2 Basic Setup Finding the Viewing Channel 1 Press to turn on the DVD/VCR. 2 Turn on your TV. If connected to your VCR, make sure it is switched off or in standby mode before proceeding. 3 Press "2" on the TV's remote control, then press channel down button repeatedly until you see the Language Select Menu. This is the correct viewing channel (Video In channel) for the recorder. LANGUAGE SELECT B ENGLISH FRANCAIS ESPAÑOL [ON] PUSH B CLEAR  Refer to your TV's user manual for SETUP details. VCR Initial Settings A LANGUAGE - VCR 1 Press . VCR light will appear on the front of the DVD/VCR. The display shown below will appear. DVD OK LANGUAGE SELECT B ENGLISH FRANCAIS ESPAÑOL [ON] PUSH B B CLOCK 1 Press VCR VCR , then press SETUP SETUP so CLOCK SET Menu appear. 2 While the MONTH space is flashing, press K or L until the month appears. Then, press B. CLOCK SET MONTH DAY 03 / -- YEAR - - - - HOUR MINUTE -- : -- AM/PM - - 3 Likewise, set the DAY, YEAR, HOUR and MINUTE. Then press B. 4 While the AM or PM space is flashing, press K or L to point to AM or PM. 5 Press CLEAR or B to start the clock. C LANGUAGE - DVD 1 Press DVD DVD to put the DVD/VCR in DVD mode. 2 While playback is stopped, press SETUP . SETUP 3 Press s or B to select CUSTOM at the top of the menu, then press OK . OK 4 With (LANGUAGE) selected, press OK . OK LANGUAGE AUDIO ORIGINAL SUBTITLE OFF DISC MENU ENGLISH OK OSD LANGUAGE ENGLISH 2 Press K or L to select ENGLISH, FRANCAIS (French) or ESPAÑOL (Spanish) as the language for VCR On-Screen Displays and menus. Then, press B. 5 Press K or L to select OSD LANGUAGE. Press OK . OK 6 Press K or L to select a language, then press OK . OK If you select OTHER for AUDIO, SUBTITLE, or DISC MENU, press four Number buttons to enter the code for the language you desire. Use one of the Language Codes listed on page 49 in the User Manual. 8/22/2007 4:19:31 PM