Philips FWC3C37 User manual - Page 22
Timer, Sleep Timer
View all Philips FWC3C37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
22 TIMER 5 Press CLOCK•TIMER again to store the setting. ™ The clock starts. • To exit without storing the setting, press Çon the system. Notes: - During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically. - When a power interruption occurs, the clock setting is erased. Timer Setting • The system can switch on to CD or TUNER mode automatically at a preset time. It can serve as an alarm to wake you up. • Before setting the timer, make sure the clock is set correctly. • The timer will always be switched on once it is set. • The volume of the timer will increase from the minimum level until the volume level before the set is switched to standby mode. 1 Press and hold CLOCK•TIMER for more than two seconds to select timer mode. ™ "12:00 AM" or "00:00" or the last timer setting starts flashing depending on whether you have selected 12- or 24-hour mode. ™ The TIMER starts flashing. ™ The selected source is lit while other available sources are flashing. 2 Press CD or TUNER to select the desired source. • Before selecting CD, make sure a CD is loaded in the CD carousel tray. 3 Press à or á on the system to set the hour for the timer to start on the system. 4 Press í or ë on the system to set the minute for the timer to start. 5 Press CLOCK•TIMER to store the start time. ™ The timer is now set. ™ The TIMER remains on the display. • At the preset time, the timer will be activated. ™ The selected source will be played. Notes: - During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. - If the source selected is TUNER, the last tuned frequency will be switched on. - If the source selected is CD, playback will begin with the first track of the selected disc or program. If the CD trays are empty, the TUNER will be selected instead. - The timer will not activate if a recording is in progress. To switch off the TIMER 1 Press and hold CLOCK•TIMER for more than two seconds. 2 Press Ç on the system to cancel the timer. ™ The timer is now switched off. ™ The display will show "CANCEL" and the TIMER disappears. To start the TIMER again (for the same preset time and source) 1 Press and hold CLOCK•TIMER for more than two seconds. 2 Press CLOCK•TIMER again to store the start time. ™ The timer is now on. ™ The TIMER appears on the display. SLEEP TIMER Sleep Timer (only on remote control) This feature allows you to select a length of time after which the system will switch to the standby mode automatically. 1 Press SLEEP on the remote control repeatedly to select a period of time. ™ The selections are as follows (time in minutes): 60 ™ 45 ™ 30 ™ 15 ™ OFF ™ 60 ... ™ "SLEEP XX" or "OFF" will be displayed. "XX" is the time in minutes. 2 When you reach the desired length of time, stop pressing the SLEEP button. ™ After this amount of time passes, the system will switch to the standby mode. To switch off the Sleep Timer • Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button. pg 01-28/C3-35-30/37-Eng 1 22 12/14/99, 9:48 AM 3139 116 19372 (ENG)