Philips FWD5 User manual - Page 17

English OPERATING THE SYSTEM Personal Setting You can adjust the personal setting to your desired level with the JOG control. 1 Press and hold PERSONAL for about five seconds to switch on the personal setting mode. ™ "SELECT PRESET NUMBER" will be displayed. 2 Adjust the JOG to select the desired preset number for personal setting and press á to confirm the selection. ™ "ADAPT LOW FREQ LEVEL" will be displayed. 3 Adjust the JOG to select the desired Spectrum Analyzer band level for low frequency. ™ The level will increase or decrease between+3 and -3. 4 Press á to confirm the selection. ™ "ADAPT MID FREQ LEVEL" will be displayed, followed by "ADAPT HIGH FREQ LEVEL". • Repeat step 3 - 4 to select the desired middle and high frequencies of the Spectrum Analyzer band levels. 5 You can edit the name for the personal setting. ™ The first character of the setting name will be flashing. 6 Adjust the JOG to select the desired letter, number or symbol. ™ "A to Z", "0 to 9" or 7 Press á to confirm the selection. ™ The next character for editing will be flashing. • Repeat steps 6 - 7 to store up to 10 characters. 8 To store the setting, press PERSONAL again. • Before storing the setting, you can press à to retrace the steps. • To exit without storing the setting, press Ç. Notes: - During personal setting, if no button is pressed within 90 seconds, the system will exit personal setting mode automatically. - It is not possible to adjust the DBB level during personal setting, "USE JOG" will be displayed. DIGITAL SOUND CONTROL (DSC) The DSC feature enables you to adjust the system to suit your type of music. 1 Press to select the DSC feature. 2 Adjust the JOG to select the desired DSC setting : OPTIMAL, CLASSIC,TECHNO,VOCAL, ROCK or JAZZ. ™ The selected digital sound is encircled. ™ "OPTIMAL, CLASSIC, TECHNO, VOCAL, ROCK or JAZZ" will be displayed. Note: - For a neutral setting, select CLASSIC. DYNAMIC BASS BOOST (DBB) There are three DBB settings to enhance the bass response. 1 Press to select the DBB feature. 2 Adjust the JOG to select the desired DBB level : BEAT, PUNCH or BLAST. ™ The DBB LED will be lit. ™ "BEAT", "PUNCH" or "BLAST" will be displayed. To switch off DBB 1 Press DBB briefly. 2 Adjust the JOG until "DBB OFF" is displayed. Note: - Some CDs might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume. Automatic DSC-DBB / VEC-DBB selection The best DBB setting is generated automatically for each DSC or VEC selection.You can manually select the DBB setting that best suits your listening environment. 17 pg 01-43/D5/37-Eng 17 7/13/00, 11:50 AM 3139 116 19774