Philips FWM143 User manual - Page 19

Clock/Timer English Setting the clock 1 In any mode, press CLOCK/TIMER twice. ➜ The clock digits for the hours flash. 2 Press TITILE-/+ ¡1 / 2™ (í/ë on the remote) to set the hours. 3 Press CLOCK/TIMER again. ➜ The clock digits for the minutes flash. 4 Press TITILE-/+ ¡1 / 2™ (í/ë on the remote)to set the minutes. 5 Press CLOCK/TIMER to confirm the time. Note: - If the clock has not been set, 0:00 will be displayed. Setting the timer ● The system can be used as an alarm clock. CD or TUNER can be set to switch on at a preset time.The clock time needs to be set first before the timer can be used. ● If no button is pressed within 7 seconds during timer setup, the system will exit timer setting mode automatically. 1 In active mode, press and hold CLOCK/ TIMER for more than 2 seconds. 2 Press TITILE-/+ ¡1 / 2™ (í/ë on the remote) to set the hours. 3 Press CLOCK/TIMER again. ➜ The clock digits for the minutes flash. 4 Press TITILE-/+ ¡1 / 2™ (í/ë on the remote)to set the minutes. 5 Press CLOCK/TIMER to confirm the time ➜ The timer is now set and actiated. Activating and deactivating TIMER ● In standby or during playback, press TIMER ON/OFF once. ➜ Display shows if activated, and disappears if deactivated. Activating and deactivating SLEEP The sleep timer enables the system to switch off by itself after a set period of time ● Press SLEEP on the remote control repeatly to select desired time before system shuts off. ➜ Display shows SLEEP and series of time options for selection:120, 90, 60, 45,30, 15, OFF. ● To deactivate, press SLEEP on the remote control once or more until 'OFF' is shown, or press STANDBY-ON y (POWER y on the remote). 19