Philips FWM575 User manual - Page 20

Radio Reception English Tuning to radio stations 1 Press TUNER to select TUNER mode. ➜ "TUNER" is displayed. A few seconds later, the current radio frequency will appear on the display. 2 Press TUNER again to select the desired waveband : FM or MW (AM). 3 Press and hold ALBUM-/+à á until the frequency indication starts to change, then release. ➜ The display will show "SEARCH" until a radio station with sufficient signal strength is found. 4 Repeat step 3 if necessary until you find the desired radio station. ● To tune to a weak station, press ALBUM-/+ à á briefly and repeatedly until optimal reception found. OR 1 Press TUNER to select TUNER mode. To begin automatic preset from a desired preset number ● Press TITLE-/+í/ë PRESET to select the desired preset number. ➜ If a radio station has been stored in one of the presets, it will not be stored again under another preset number. 2 Press and hold PROGRAM until "AUTO" is displayed. ➜ PROG starts flashing. ➜ All available radio stations with sufficient signal strength will be stored automatically, starting from FM and followed by AM band. ➜ When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station will be played. Storing preset radio stations You can store up to 40 preset radio stations in the memory. Automatic Preset Programming ● Plug and Play setting (refer to "Basic Functions Plug and Play"). To stop storing the automatic preset ● Press PROGRAM or STOPÇ on the system. Note: - If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden. 20