Philips HDP1590 User manual - Page 15

Connecting the headphones 1 Before connecting the headphones, turn down the volume on the device. 2 Connect the headphones to the projector's headphone slot. The device speakers deactivate automatically when the headphones are connected. 7 Connect the external device (smartphone or tablet) to the same WiFi network that the projector. 8 Select on the WifiDisplay application of the external device the name of the projector connection (in the example Screeneo_5f31). 9 Connect the external device (smartphone or tablet) to the projector, it will show up connecting. 10 In the WifiDisplay application of the projector, it will show up the message Invitation to connect, Decline or Accept, select Accept. PHILIPS 3 After connecting the headphones, increase the volume to a comfortable level. DANGER! Danger of Hearing Damage Do not use the device over a longer time at high volume - especially when using headphones. This could lead to the risks of hearing damage. Before connecting the headphones, turn down the volume on the device. After connecting the headphones, increase the volume to a comfortable level. WiFiDisplay (Miracast) Notice Only the Miracast-certified devices can be used with this function. 1 Switch the device on using the on/off key. 2 After the initial screen the main menu appears. Notice The projector must be connected to a WiFi network. 3 Use the navigation keys to select APPs. 4 Confirm with OK. 5 Use the navigation keys to select WifiDisplay. 6 Confirm with OK. Notice The name used to identify the projector can be modified in the Setting menu. ScreeneoWLink software It allows to connect the projector to a desktop PC or laptop via the wireless or wired network and to use the Screeneo as computer screen. For this, both devices must be connected to the same wireless or wired network. Screeneo firmware version 1.20 must be installed on your projector. Check the version of firmware installed on your projector by going to the Settings menu > Maintenance > Firmware version. If the Screeneo firmware version is 1.20, refer to paragraph Install the ScreeneoWLink software on my computer. If the Screeneo firmware version is less than 1.20, refer to paragraph Update the software in my projector. Update the software in my projector You can find the Screeneo firmware version on the site « Philips »: www.philips.com/screeneo for loading the file proceed as following You must download the file on SD-card formatted FAT16 or FAT32, on USB stick or on USB digital support in order to update your Screeneo. Get yourself a suitable digital media and insert it into your computer. 1 Launch an Internet browser, in the address bar, type the address: www.philips.com/screeneo. 2 Choose your country and click on the language. 3 Click on View All 4 Products for select your model. 4 Select exactly your model with mouse. 5 In the new screen, research Support and click on. 6 The "Screeneo Smart LED projector" screen appears. In the "Software & drivers" select your language and click Download file. Notice The file on the website is a zip file. It has to be unpacked and put on the root folder of the SD-card or USB-stick. 7 Depending on the browser used, save the file in the root of your digital media. Connect to the Playback Device 15