Philips HF3321 User manual - Page 8

12 English Installation 1 Remove the stand from the stand storage cavity (Fig. 2). 2 Insert the bevelled end of the stand into the hole on the back of the appliance. Magnets hold the stand in place (Fig. 3). 3 Put the adaptor in the wall outlet and insert the appliance plug into socket on the appliance (Fig. 4). 4 Place the goLITE BLU approximately 20-30 in./50-75cm from your eyes in such a way that the light bathes your face from the side (Fig. 5). -- You can read, eat, work at the computer, watch TV or exercise while you use your goLITE BLU energy light. -- For the best results, place the goLITE BLU at the same level as your midriff (stomach area), e.g. place it on the table at which you are sitting. Note: Do not stare into the light of the LED panel. It is sufficient that the blue light reaches your eyes indirectly from the side. -- Use your goLITE BLU in a well-lit room to minimize eye strain. Demo mode The demo mode is used to demonstrate the goLITE BLU energy light in stores.When the appliance is turned on in demo mode, customers of the store can: -- adjust the light intensity -- turn the appliance on and off -- set the light time If the appliance is not operated for 3 minutes, it reverts to its demo mode default settings. To activate the demo mode: 1 Put the adaptor in the wall outlet and insert the appliance plug into socket on the appliance (Fig. 4). 2 Press and hold both the on/off button and light intensity button for 3 seconds (Fig. 6). English 13 ,, The appliance turns on and the segments of the timer indicator go on and off in a rotating pattern. ,, The LED panel goes on at the low light intensity level. Note:The appliance remains turned on in demo mode until it is turned off. To deactivate the demo mode, press and hold the on/off button and light intensity button together for 3 seconds. Note:If the appliance has been in DEMO mode for 10 hours, or it is unplugged, the appliance will turn off, and the DEMO mode will be deactivated. Using the appliance Use this appliance for its intended household use as described in this manual. 1 Put the adaptor in the wall outlet and insert the appliance plug into the socket on the appliance (Fig. 4). 2 Press the on/off button briefly to turn on the appliance (Fig. 7). ,, The first segment of the time indicator goes on and blinks for 3 seconds (Fig. 8). ,, When the time indicator stops blinking, the LED panel goes on and the timer starts counting down to the set time (Fig. 9). Note:The timer is automatically set to 15 minutes. Note:The LED panel only goes on after the time indicator stops blinking.This prevents the light from shining into your eyes while you are setting the time. 3 If you want to switch off the appliance before the set time has elapsed, press the on/off button 2 seconds. Note:You can also switch off the appliance by briefly pressing the on/off button a few times. Note:The appliance will automatically switch off after the set time duration. 4 Unplug the appliance after use.