Philips HSB2351 User manual - Page 33

Disc does not play, OPTIONS, Poor radio reception, Unable to select Progressive Scan, No sound

Page 33 highlights

Disc does not play • Insert a readable disc and ensure that the label side faces outwards. • Check the disc type, color system and regional code. Check for any scratches or smudges on the disc. • Press OPTIONS to exit the system setup menu. • Disable the password for parental control or change the rating level. • Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. Disconnect and reconnect the AC power plug, and then turn on the system again. • As a power-saving feature, the system turns off automatically 15 minutes after disc play reaches the end and no control is operated. Poor radio reception • Increase the distance between the unit and your TV or VCR. • Fully extend the FM antenna. • Connect an outdoor FM antenna instead. Unable to select Progressive Scan • Ensure the component video mode is set to [YUV]. No sound on HDMI connection. • You may not hear any sound if the connected device is non-HDCP compliant or only DVI-compatible. Audio or subtitle languages cannot be set • The disc is not recorded with sound or subtitles in multiple languages. • The audio or subtitle language setting is prohibited on the disc. 34 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

34
Disc does not play
Insert a readable disc and ensure that the
label side faces outwards.
Check the disc type, color system and
regional code. Check for any scratches or
smudges on the disc.
Press
OPTIONS
to exit the system
setup menu.
Disable the password for parental control
or change the rating level.
Moisture has condensed inside the system.
Remove the disc and leave the system
turned on for about an hour. Disconnect
and reconnect the AC power plug, and
then turn on the system again.
As a power-saving feature, the system
turns off automatically 15 minutes after
disc play reaches the end and no control is
operated.
Poor radio reception
Increase the distance between the unit and
your TV or VCR.
Fully extend the FM antenna.
Connect an outdoor FM antenna instead.
Unable to select Progressive Scan
Ensure the component video mode is set
to
[YUV]
.
No sound on HDMI connection.
You may not hear any sound if the
connected device is non-HDCP compliant
or only DVI-compatible.
Audio or subtitle languages cannot be set
The disc is not recorded with sound or
subtitles in multiple languages.
The audio or subtitle language setting is
prohibited on the disc.
EN