Philips HTL2163B User manual - Page 14

Wall mount - 12 soundbar

Page 14 highlights

5 On the remote control, within six seconds press twice then Volume + once, and then hold down SURROUND ON. »» If an upgrade media is detected, on the TV screen you are prompted to start the update. »» If an upgrade media is not detected, an error message is displayed on the TV screen. Make sure that the latest software of this product is put in the USB storage device. 6 Press to start the update. 7 Wait until the update is completed. »» If the update is complete, this product automatically turns off and on again. Caution •• Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage this player. 6 Wall mount Note •• Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. •• Before wall mounting, make sure the wall can support the weight of your SoundBar. •• Before wall mount, you need not remove the four rubber feet at the bottom of the SoundBar, otherwise the rubber feet cannot be fixed back. Screw length/diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. 3.5-4mm 4mm > 25mm See the illustration in the quick start guide on how to wall mount the SoundBar. 1) Drill two holes on the wall. 2) Secure the dowels and screws in the holes. 3) Hang the SoundBar on the fastening screws. 12 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

12
EN
5
On the remote control, within six seconds
press
twice then
Volume +
once, and
then hold down
SURROUND ON
.
»
If an upgrade media is detected, on the
TV screen you are prompted to start
the update.
»
If an upgrade media is not detected,
an error message is displayed on the
TV screen. Make sure that the latest
software of this product is put in the
USB storage device.
6
Press
to start the update.
7
Wait until the update is completed.
»
If the update is complete, this product
automatically turns off and on again.
Caution
Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this player.
6 Wall mount
Note
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
Before wall mounting, make sure the wall can support
the weight of your SoundBar.
Before wall mount, you need not remove the four
rubber feet at the bottom of the SoundBar, otherwise
the rubber feet cannot be fixed back.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
See the illustration in the quick start guide on
how to wall mount the SoundBar.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang the SoundBar on the fastening screws.
> 25mm
3.5-4mm
4mm