Philips HTS6515D Quick start guide - Page 2

1 Connect A Placement Proper speakers system placement is important to ensure optimum sound performance. LEFT RIGHT B Connect speakers Subwoofer (rear) LEFT RIGHT A Connect the left and right Ambisound speakers to the matching jacks on the subwoofer. C Prepare for rear connections D Connect to TV DVD Home Theater unit (rear) VIDEO OUT Or HDMI OUT VIDEO IN HDMI IN A If your TV supports HDMI, connect the HDMI cable from the HDMI OUT jack to the HDMI IN jack on your TV (or connect the component video cables to the corresponding COMPONENT VIDEO jacks.) B Connect the composite video cable from the VIDEO OUT jack to the VIDEO IN jack on your TV (this connection is required for iPod video play.) Note HDMI connection does not support audio output from your TV to this unit, a separate audio connection is required. E Connect audio output from TV (for EasyLink control) To hear the TV audio through this DVD Home Theater unit, connect an audio cable (not supplied) from the AUDIO IN-AUX1 jacks to the AUDIO OUT jacks on your TV. A Push up the catch and remove the rear cover. B Connect the required cables (see the following sections for details) and direct all the cables to the open hole on top. Note To listen to the audio output from this connection, press AUX/DI /MP3 LINK repeatedly until 'AUX1 INPUT' is displayed on the display panel. 2 Set up F Connect subwoofer and power cable Subwoofer (rear) FM antenna B A TO SUBWOOFER A Find the viewing channel A Press 2 to turn on this DVD Home Theater unit. B Turn on the TV. Use the TVs remote control to select the correct viewing channel. Note To search for the correct viewing channel, press the Channel Down button on the TVs remote control repeatedly (or AV, SELECT, ° button) until you see the Video In channel. If you are using a RF modulator, set the TV to channel 3 or 4. C A Unwind the cables from TO MAIN UNIT on the subwoofer and connect it to TO SUBWOOFER jack on this DVD Home Theater unit. B Connect the FM antenna to the inner pin of the FM 75 jack (for some models, it has been connected in the factory.) Extend the wire for optimum reception. C Connect the power cable from subwoofer to the AC power outlet. G Attach table stand to DVD Home Theater unit Align Arrow Align Arrow With table Stand With Table Stand A A table stand bracket A Close the rear cover. B Place the table stand bracket with the arrow indicators aligned. Then use the protrude panels to hold the table stand bracket. Note All the cables must be placed properly inside the rear panel in order for the rear cover to close. B Start Ambisound setup When you turn on this DVD Home Theater unit for the first time, change the Ambisound setup according to your room environment and setup. A In disc mode, press OPTIONS. B Press V to select [ Audio Setup ] in the menu, then press B. C Select [ Ambisound Setup ] in the menu, then press B. D Select a setup you want to change, then press B. [ Room Acoustics ] Select the type of walls that surround your room. The default setting is [ Hard (concrete, wood) ]. [ Room Placement ] Select the speakers placement position in your room. The default setting is [ Middle of room ]. [ Speaker Distance ] Select the distance between two speakers. The default setting is between 2~3 meters. [ Listening Position ] Select the distance between the listening position and the speakers. The default setting is between 2~3 meters. E Press vV to select a setting, then press OK. F To exit the menu, press OPTIONS. Note Refer to the accompanying user manual for other setup options.