Philips JR24CDRW User manual - Page 24

Install Guide panels 10/3/02 8:21 AM Page 24 What if my computer crashes while using the drive? Restart the computer and Windows application, then start the installation or copying process again. What is the purpose of the LED's on the left side on my unit? The LEDs will only light up if both the power supply and the computer are connected. LED color Description Green No disc present Blue Disc present / reading disc Red Recording in progress What is the purpose of the BLUE BUTTON? Push this button to open an application window for this drive with useful Internet addresses and applications. (Provided the connected computer is switched on, has a functioning Internet connection and has the Blue Button application resident in its memory.) What if my door will not open and I have a disc stuck in the drive? Disconnect the power supply from the drive first and be sure the disc does not spin anymore (see lid window). Then insert a short and slender pin behind the stud within the hole in the bottom of the drive and pull the stud forward to release the lid. NOTE: The eject hole is for emergency use only with the drive disconnected from the power supply. For normal opening of the lid connect the power supply to the Jack Rabbit and push the OPEN button. Immediate interruption of the recording process (red led illuminated). By keeping the OPEN button pressed for more than 4 seconds, the recording will be interrupted immediately. The lid will open and the recording software will report an error in the recording process. NOTE: This will render the disc useless. IF YOU NEED ASSISTANCE... Visit our web site at www.pcstuff.philips.com or www.philips.com Or, call us at 1-888-541-5837. We are available, Eastern Standard Time, from 9 a.m.-11 p.m. EST Monday-Friday, and 11 a.m.-10 p.m. EST Saturday and Sunday.