Philips LFH0884 User Manual - Page 10

4 Record 4.1 Record with the built-in microphone 1 Press the INDEX / a button while the recorder is stopped to select the desired folder. 2 Press the g button to start recording. • The record/play indicator lights red. Point the built-in microphone toward the sound source. 3 To pause recording, press the g button. • The record/play indicator will blink, and PAUSE will flash on the display. 4 Press the g button again to resume recording. 5 To stop recording, press the j / DEL button. D Notes • Set the desired voice activation function and recording mode before starting recording (see chapter 8, Customize settings on page 18 for more information). • Make a test recording to make sure that the Voice Tracer settings are correct. • Press and hold k during recording to display the remaining recording time. • Press b during recording to create a new file. • The maximum number of files in each folder is 99, for a total capacity of 396 files (99 files x 4 folders). • If the recording time exceeds the available capacity or the number of files reaches 396, recording stops and FULL will be displayed. Delete a few recordings or move them to a computer. • Do not remove the batteries during recording. This may cause the recorder to malfunction. • If recording for a prolonged period of time, replace the batteries before beginning. • The Voice Tracer can record while powered through a USB cable without draining the battery. Connect the recorder to a computer using the USB cable and press the g button for 1 second or longer to start recording. 4.2 Record with an external microphone To record with an external microphone, connect the microphone to the microphone socket and follow the same procedure as for the built-in microphone. The internal microphone is switched off when an external microphone is connected. 4.3 Edit a previously recorded file You can edit a previously recorded file by overwriting part of the recording or appending a recording at the end of the file. 1 Set the desired edit mode (overwrite or append) before starting recording (see chapter 8, Customize settings on page 18 for more information). 2 Press the INDEX / a button while the recorder is stopped to select the desired folder. 3 Press the h or b button to select the file to which the addition 10 Record Table of contents