Philips MC138 User manual - Page 19

English Clock/Timer Setting the clock 1 Press and hold CLOCK button. ➜ The clock digits for the hours flash. 2 Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to set the hours. 3 Press CLOCK again. ➜ The clock digits for the minutes flash. 4 Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to set the minutes. 5 Press CLOCK to confirm the time. Viewing the clock To view the clock time in any source mode, press CLOCK, the clock time will be displayed for few seconds. Note: - If the clock has not been set, --:-- will be displayed. Setting the timer ● The system can be used as an alarm clock. CD or TUNER can be set to switch on at a preset time.The clock time needs to be set first before the timer can be used. ● If no button is pressed within 90 seconds during timer setup, the system will exit timer setting mode automatically. 1 In any mode, press TIMER for more than 2 seconds. 2 Press SOURCE (VOL 3 / 4 on the remote control) to select sound source. 3 Press TIMER to confirm your desired source. ➜ The selected source CD or is shown. The clock digits for the hours flash. 4 Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to set the hours. 5 Press TIMER again. ➜ The clock digits for the minutes flash. 6 Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to set the minutes. 7 Press TIMER to confirm the time. ➜ The timer is now set and actiated. Note: - Timer will not start if recording is in progress - If source CD is selected and no disc is in the CD tray or the disc has an error,TUNER will be selected automatically. Activating and deactivating TIMER ● In standby or during playback, press TIMER once. ➜ Display shows TIMER if activated, and disappears if deactivated. 19