Philips MC235B User manual - Page 15

English Radio Reception 2 Press PROGRAM for more than 2 seconds to activate programming. ➜ AUTO is displayed and available stations are programmed in order of waveband reception strength: FM followed by AM. The last preset automatically stored will then be played. Tuning to radio stations 1 Press SOURCE to select TUNER. ➜ TUNER is displayed briefly. 2 Press BAND (or TUNER on the remote control) once or more to select your waveband. (FM/ AM) 3 Press and hold TUNE à or á. ➜ The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH. 4 Repeat step 3 if necessary until you find the desired station. ● To tune to a weak station, press TUNE à or á briefly and repeatedly until you have found optimal reception. Manual programming 1 Tune to your desired station (see Tuning to radio stations). 2 Press PROGRAM to activate programming. ➜ PROGRAM flashes in the display. 3 Press PRESET ¡ or ™ to allocate a number from 1 to 40 to this station. 4 Press PROGRAM again to confirm the setting. ➜ PROGRAM disappears, the preset number and the frequency of the preset station are shown. 5 Repeat the above four steps to store other stations. ● You can override a preset station by storing another frequency in its place. Tuning to preset radio stations ● Press PRESET ¡ or ™ until the desired preset station is displayed. Programming radio stations You can store up to a total of 40 radio stations in the memory. Automatic programming Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden.The system will only program stations which are not in the memory already. 1 Press PRESET ¡ or ™ to select the preset number where programming should start. Note: - If no preset number is selected, default is preset (1) and all your presets will be overridden. 15