Philips MC260 User manual - Page 18

English Tape Operation / Recording Synchro start CD recording 1 Select CD source. 2 Insert a disc and if desired, programme track numbers. 3 Press OPEN•CLOSE 3 to open the tape door. 3 Press RECORD to start recording. ➜ RECORD is displayed briefly and RECORD is shown during recording. G If you wish, press CLOCK once to monitor the counter display. 4 To stop recording, press STOP 9. Recording timer 4 Insert a suitable tape into the deck and close the tape door. 5 Press RECORD to start recording. ➜ COPY or RECORD is displayed briefly and RECORD is shown during recording. ➜ Playing of the CD programme starts automatically from the beginning of the CD after 7 seconds. It is not necessary to start the CD player separately. G If you wish, press CLOCK once to monitor the counter display. To record from the radio, you will need to use a preset radio station and to set a start (ON) and finish (OFF) time. 1 Insert a suitable tape into the deck. ➜ If desired, select tape reverse mode option. 2 Select the preset radio station to record from. 3 Press TIMER ON•OFF for more than 2 seconds. ➜ TIMER flashes and a source is displayed. 6 To stop recording, press STOP 9. Recording from the radio 1 Tune to the desired radio station (see Tuning to radio stations). 2 Press OPEN•CLOSE 3 to open the tape door. 3 Insert a suitable tape into the deck and close the tape door. 4 Press RECORD to start recording. ➜ RECORD is displayed briefly and RECORD is shown during recording. G If you wish, press CLOCK once to monitor the counter display. 5 To stop recording, press STOP 9. Recording from Aux 1 Select AUX source. 2 If necessary, prepare the additional appliance for recording. 4 Press SELECT SOURCE repeatedly, or turn VOLUME clockwise until REC TUN source is displayed. 5 Press TIMER ON•OFF to confirm the source. ➜ SET ON TIME is displayed, TIMER and the clock digits for the hours flash. 6 Turn VOLUME to set the hours: clockwise for hours up; anti-clockwise for hours down. 7 Press TIMER ON•OFF again. ➜ The clock digits for the minutes flash. 8 Turn VOLUME to set the minutes: clockwise for minutes up; anti-clockwise for minutes down. 9 Press TIMER ON•OFF to confirm the ON start time. ➜ SET OFF TIME is displayed, TIMER and the clock digits for the hours flash. 10 Repeat steps 6-8 to set the finish time. 11 Press TIMER ON•OFF to confirm the timer settings. ➜ TIMER is shown and the recording timer is now set. 18