Philips MCD515 User manual - Page 15

English Step 2: Connecting speakers FM Antenna Connections 1 2 Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left speaker to "LEFT", coloured (marked) wire to "+" and black (unmarked) wire to "-". Fully inser t the stripped portion of the speaker wire into the terminal as shown. Notes: - Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit. - For optimal sound performance, use the supplied speakers. - Do not connect more than one speaker to any one pair of +/- speaker terminals. - Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual. Step 3: Antenna connection Connect the supplied AM loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception. ● For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal. Step 4: Connecting TV IMPORTANT! - You only need to make one video connection from the following options, depending on the capabilities of your TV system. - Connect the DVD system directly to the TV. Using component Video In jack (Cr Cb Y) AM Antenna 2 1 AM ● Position the antenna as far as possible from a TV, VCR or other radiation source. DIGITAL OUT R LINE OUT L 3 R L AUX/ CDR IN AM ANTENNA FM ANTENNA 15